国产美女大片-国产美女大秀-国产美女电影-国产美女多p视频-国产美女福利在线-国产美女户外直播-国产美女精品ⅴ在线-国产美女精品视频

XJTAG releases the latest version V4.0.3

Link：https://share.weiyun.com/Q3z7qEsX Password：k8eufi

· XJDeveloper:

o Start Screen: Fix a typo in the XJEase library update notification.

o Boards Screen:

§ Fix a typo in a warning about existing boards when manually creating a board.

§ Editing the BOM for a board that is in a different directory to the project could cause spurious errors to be displayed.

§ Fix a potential crash editing schematics for a board with the schematic viewer open.

§ Improve column width behaviour in grid mode.

o Connections Screen:

§ Fix a potential crash caused by allowing an invalid connection to be created.

§ Fix the Help button on the Add Range dialog.

o Power/Ground Nets Screen:

§ Some pull resistor errors could persist after being fixed and would require the project to be saved and re-opened to clear.

§ Flag resistors less than 10 Ohms on termination reference nets as links.

o JTAG Chain Screen: Prevent the columns of the JTAG Devices table from snapping to their minimum widths when resizing.

o Categorise Devices Screen:

Don’t switch to the Test Device Files Screen when undoing or redoing change to configuration variables made on the Categorise Devices Screen.

§ Improve the behaviour of columns in the grid in the Assign Device as Logic dialog.

§ Imptove the column resizing behaviour of the uncategorised devices list.

o Logic Files Screen: Create the Local XJTAG Logic library automatically when adding a definition.

o Variants Screen: Prevent the variant errors and warnings windows from being un-docked.

o Test Coverage Screen:

§ Editing a BSDL file could cause duplicate checkboxes to appear in the Show Coverage from Profiles section.

§ Fix an issue where the scroll position in the Summary Statistics could move when expanding and collapsing items.

o Pin Mapping Screen:

§ When an automatically configured item is edited, ensure that the item is always marked as manual.

§ Ensure that a profile is always correctly marked as auto or manual after a subchain reset is configured.

§ Ensure that XJEase code errors and warnings are re-evaluated after the pin mapping is edited.

§ The Advanced Configuration Options tab could automatically scroll to the bottom whne switching screens or resizing the application.

§ Fix auto configuring profiles and subchains after importing a SPEA project.

§ Doing a redo of a pinmap edit after undoing multiple edits, could cause all the undone changes to be redone.

§ Signal Integrity:

§ Fix a typo in the summary.

§ Improve diagnosis of situations where a data shift may be present.

o Analyser Screen:

§ Fix a potential crash when a multi-core JTAG device has been varied to unfitted.

§ Blank devices were displayed on the screen after JTAG devices had been removed on the JTAG Chain screen.

o XJRunner Setup Screen: Don’t same column widths when defining bus access overrides.

o Code Editors: Fix various bugs around menu merging.

o Variants:

§ Scroll to the topmost selected item after accepting/rejecting suggestions rather than trying to maintain the same scroll position.

§ Fix spurious errors appearing after making edits on the pin mapping screen.

§ Fix a potential crash when there are identical global variables across device variants.

o Revisions:

§ Fix an issue where the revised project could be created with invalid relative paths.

§ Fix an issue where duplicate copies of some files could be saved in incorrect locations in a revised project.

§ Fix the path of the .xjd project file that is displayed in the dialog before any board changes have been made.

§ Cancelling opening a project could cause multiple revision checklists to be displayed.

o Fix an issue where a project copy created using Save As might contain invalid relative paths if additional files were added from outside the project directory.

o Prevent an unnecessary second recompile of the XJEase code when assigning or un-assigning devices.

o Ensure that per-screen menu items are inserted in consistent locations.

o Fix a potential crash or deadlock when project errors occur and the Explorer window is open.

· XJAnalyser:

o Improve the control used to set the project TCK frequency when the project uses classic scans.

o Fix a potential crash closing the project after docking a floating window.

o Remove the ability to sort busses in the Pin Watch window.

o Fix a performance issue selecting many pins in the Pin List.

o Make chain properties dialog display information per subchain.

o Fix a potential crash starting a new waveform capture immediately after saving the previous waveform capture.

· XJRunner:

o When displaying a message box as a result of an XJEase MESSAGEBOX or MESSAGEBOX_ASYNC call, do not display a close button on the window.

o Fix F1 help on the application’s main form.

o Fix opening variants from an XJPack file.

· JTAG Chain Debugger:

o Display XJLinks in the Select XJLink dialog as they are connected.

o Improve the reliability of Get Max. TCK when autoskew is disabled.

· Log File Viewer: Do not require an XJRunner licence at startup.

· Layout Viewer:

o Don’t allow spaces in image layer names.

o Fix a potential crash when component layers are defined in the matrix file, but are not present.

· Schematic Viewer: Limit the number of search results when falling back to searching for pins on a net.

· XJIntegration:

o Make running tests after stopping the previous tests more reliable.

o Don’t allow tests to be run from profiles that are not available in the current variant.

o Improve the Single Test Run LabVIEW VI.

· XJEase: Ensure that line-endings in File Copy tags are copied into device files correctly.

· Connection Test:

o Ensure that ground nets gets tested correctly when the XJLink2 connection is configured to the UUT.

o Prevent driving conflicts in some scenarios with common controls.

o Ignore shorts from logic devices to unconnected pins if the option to ignore short errors to unconnected pins is set.

o Fix running in a variant with an unfitted multi-core JTAG device.

o Return quasi buffer pins – pins that cannot be disabled because they are enabled via a common control – back to their original state at the end of buffer tests.

o Fix an issue where inverted short errors could sometimes not be reported.

o Improve stuck detection.

· SPEA: Prevent a spurious warning about the test-point list and voltage domains files being newer, when opening a project that has been unzipped.

· Netlists:

o Support a new variation of the IPC-D-356A format.

o Support some new variations of a format from Xpedition.

o Handle Allegro netlists containing empty nets.

· Fix playback of recordings made under an older version of the XJLink Manager.

· Installer:

o Include XJEase Library v182.

o Update the IO Board example to use Globals.xje from the library.

· Help:

o Add user guide for revisions.

o Fix searching for terms that contain an ‘@’ symbol.

o Add concepts section to each individual application’s help.

o Warning 072 included the string \n in the help output.

· Fix JTAG state transitions where the target state is the same as the current state.